PARTLINER™ – The Original
Short liner rehabilitation has a name – PARTLINER™. In combination with hardener RE60 and a 1415 gr/m2 glass fibre mat PARTLINER™ has been granted DIBt approval (Z-42.3-538) for the repair of defective sewer pipes laid in the ground as well as for the repair of CIP liners, for example aborted drill holes, stress cracks or defects after high pressure jetting.
This process is characterized by its perfect adesion to nearly any surfaces and its extremely high chemical resistance. The PARTLINER™ is resistant to high-pressure flushing and with a special hardener temperature resistent up to 140 degrees Celsius.
Installation with the PARTLINER™ System guarantees a consistently high quality. The system offers users a high degree of work safety and automatically documents the installation.
Find out more about our PARTLINER™ System here.
Colour: liner coloured / transparent (after curing)
Density: ca. 1,05 kg/litre
Consumption: approx. 2 kg/m² applied on a 1415 g/m² GF mat
Pot life (at 20° C): approx. 25 min. (with hardener RE38)
approx. 35 min. (with hardener RE60)
Curing time (at 20° C): approx. 2,5 hours (with hardener RE38)
approx. 4 – 5 hours (with hardener RE60)
Packaging unit: 10 kg hobbock of PARTLINER™ resin
5 kg hobbock of hardener RE38
5 kg hobbock of hardener RE60
Watch now: “Correct mixing” and “Impregnation with vacuum”
Activate the english subtitle